Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reattach the Interior Rear-View Mirror

Model: (Various brands) Various
Part: Rearview mirror

In this video, learn how to reattach the rear-view mirror of your car that may have come loose. First, obtain a good adhesive to fix the mirror: if you're interested in the same glue recommended by the YouTuber, you can find it on Amazon with the code B000AL2RI2 for £7.50, including delivery for Prime customers. You will also need a blade to remove any adhesive residue from the support that held the mirror. To remove it more easily, you can also detach the support and then refit it. There will likely be adhesive residue on the support that remained attached to the glass, so remove that as well. This operation should be done at a temperature between 10 and 24 degrees Celsius, applying a drop in the centre of the plate, ensuring the correct orientation of the plate (otherwise, it won't come off) and allowing it to dry for half an hour. Now you can refit the mirror and tighten the fixing screw. Job done.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to glue the rearview mirror onto the windshield
How to glue the rearview mirror onto the windshield
(Various brands) Various .. If the support of the rearview mirror should come off from the windshield, let's see how to proceed to glue it back in position... …
How to Reattach the Interior Rear View Mirror
How to Reattach the Interior Rear View Mirror
(Various brands) Various .. The procedure for reattaching the rear view mirror on a vehicle (in this case, a van) is the same for all vehicles. First, clean the area of.. …
How to position the Telepass holder on a vehicle
How to position the Telepass holder on a vehicle
(Various brands) Various .. First of all, the ideal position behind the rearview mirror must be identified, clean the inside of the windshield with a microfiber cloth and remove.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos