Do it yourself
Frequently asked questions about cars and motorcycles

How to Install an Internal Rear-View Mirror

Model: (Various brands) Various
Part: Rearview mirror

Most internal rear-view mirrors are clipped (dovetail mount) onto a small plate glued to the windscreen. It is quite common for the plate to come unstuck and need to be re-glued. It is essential to thoroughly clean both the glass surface and the plate surface, and especially to use the appropriate adhesive, applying the primer first. Clean the glass using a razor blade and the plate using fine sandpaper. Use solvent to further clean the surface, apply the primer, and then the adhesive, securing the plate and waiting for it to dry. Finally, reinsert the mirror.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various .. To install a rear-view mirror (it is better to install a pair), follow the simple instructions outlined below and refer.. …
(Various brands) Various .. Is the external rear-view mirror broken and you don't know how to remove it? Let's see how to change it from its housing... …
(Various brands) Various .. Is the car rear-view mirror damaged? Remove it from above the mirror and replace it. You can also repair it. Pry between.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos