Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
The replacement of the timing belt and the relative tensioner, bearing and water pump kit must be carried out by qualified personnel since an error could seriously damage the engine; start by disconnecting the battery, removing the plastic cover on the engine, disassemble the right front wheel to access the crankshaft pulley, remove the auxiliary belt, remove the lateral engine support and then the plastic cover that protects the belt; remove the crankshaft pulley and rotate the shaft to align the timing references; loosen the tensioner and remove the toothed belt and then remove the tensioner and the water pump; proceed in reverse by installing the new kit, taking care to maintain the timing references and adjustment of the tensioner; before starting the engine, fill the cooling circuit with suitable coolant.
Posted on 17 September 2023 by ScegliAuto
Timing points of the JTD 2.0 MultiJet 16V engine
(Various brands) Various In this video we see the timing points of a JTD MultiJet 2.0/1.9 and 1.6 16V engine. Fiat/Alfa Romeo/Opel. When installing the timing belt, we need t
Timing belt replacement
(Various brands) Various In this video tutorial we will see some useful and practical tips to be able to change the timing belt of our vehicle. The timing belt is one of the
How to replace the timing belt on a Toyota engine.
(Various brands) Various This video tutorial shows how to replace the timing belt, showing the operations to be carried out step by step. The timing belt is a fundamental com Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.138
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |