Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
This video tutorial shows how to replace the timing belt, showing the operations to be carried out step by step. The timing belt is a fundamental component that must be replaced periodically as it wears and can gradually harden over time and if even one of the belt teeth breaks, the engine could stop suddenly and could damage the valve mechanism, especially in Diesel engines. The main components of the timing belt are represented in the video. The timing belt replacement procedure varies according to the car and engine model, however the sequence of operations is always the same. First of all the timing belt is removed, secondly the tappet cover is removed, thirdly it is necessary to position cylinder number one, at the top dead center in the compression phase; fourth procedure it is necessary to remove the pulley of the crankshaft; fifth operation it is necessary to replace the timing belt; sixth phase we proceed with the reassembly of the disassembled parts.
Posted on 6 September 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |