Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Box Diagram for Volkswagen Crafter 2019

Model: Volkswagen Crafter 2E, 2F, MK 1 - Years 2006-2017
Part: Fuse box

This vehicle has 3 fuse boxes. The first is located in the engine compartment above the battery, the second is found in the cabin on the left pillar, and the third is also in the cabin under the driver's seat. Below are some of the main fuses present in the box under the driver's seat: the fuse for the front window lift control unit, the fuse for the heated rear window, the fuse for the windscreen wiper motor, the fuse for the cruise control, the fuse for the automatic gearbox control unit, the fuse for the battery, the fuse for the fuel filter heater, and the fuses for the parking sensors.

Updated on 20 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) These short and simple instructions will show us the layout and positioning of the fuse boxes of the Volkswagen Crafter. First of all, let's locate t…
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) Today's guide will illustrate the placement of the internal fuse boxes of the Volkswagen Crafter. First, let's open the driver's side front door and …
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) The steps outlined in this guide will show you where to find the fuse boxes of the Volkswagen Crafter. First, get inside the vehicle to locate the in…

Other guides you may be interested in

    Frequently Asked Questions

    • Crafter 2017-2026 - In which position is the fuel pump relay in the Volkswagen Crafter? Read answer
    • Crafter 2017-2026 - What is the fuse for the interior lighting of the Volkswagen Crafter? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos