Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the BCM Module of the Volkswagen Transporter

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Control unit

In this short guide, discover the instructions on how to disassemble and replace the BCM (Body Control Module) of the Volkswagen Transporter. First, get inside the cabin and start by removing the plastic cover located under the steering wheel, thus accessing the BCM module; disconnect all power wiring and unscrew the fixing screws to remove it, as shown in the video. At this point, carry out the repair or replacement of the BCM module, performing the learning and reset of any fault lights in the electrical system if necessary using diagnostic tools.

Posted on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you check and how do you remove the BCM on a Volkswagen T6 Transporter?
How do you check and how do you remove the BCM on a Volkswagen T6 Transporter?
Volkswagen Transporter (2014-2025 / MK 6, T6) To check and remove the BCM (Body Control Module) on a Volkswagen T6 Transporter, you first need to know where it is located. Usually, it is behind t…
Replacing the Lock Module of the Volkswagen Transporter
Replacing the Lock Module of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) In this guide, you will find instructions to replace the lock module and actuator of the Volkswagen Transporter. First, open the front driver's door …
Disassembly of the front door lock of the Volkswagen Transporter.
Disassembly of the front door lock of the Volkswagen Transporter.
Volkswagen Transporter (2003-2014 / T5, MK 5) Below we will see the instructions that will allow us to disassemble and replace the lock of the front door of the Volkswagen Transporter. First, we …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos