Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock Module of the Volkswagen Transporter

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Door lock

In this guide, you will find instructions to replace the lock module and actuator of the Volkswagen Transporter. First, open the front driver's door and begin removing the door panel by unscrewing all the fixing screws. Then, remove the handle and any lock cylinder. At this point, unscrew the screws of the module and actuator, disconnecting the wiring. Carry out the repair or replacement of the lock module, following the video tutorial to the end!

Posted on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door lock of the Volkswagen Transporter.
Disassembly of the front door lock of the Volkswagen Transporter.
Volkswagen Transporter (2003-2014 / T5, MK 5) Below we will see the instructions that will allow us to disassemble and replace the lock of the front door of the Volkswagen Transporter. First, we …
How to Replace the BCM Module of the Volkswagen Transporter
How to Replace the BCM Module of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) In this short guide, discover the instructions on how to disassemble and replace the BCM (Body Control Module) of the Volkswagen Transporter. First, …
How to Disable the Passenger Airbag on a Volkswagen Transporter
How to Disable the Passenger Airbag on a Volkswagen Transporter
Volkswagen Transporter (2014-2025 / MK 6, T6) You can disable the passenger airbag on a Volkswagen Transporter by opening the front passenger door to access the corresponding side of the dashboar…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos