Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door lock of the Volkswagen Transporter.

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Door lock

Below we will see the instructions that will allow us to disassemble and replace the lock of the front door of the Volkswagen Transporter. First, we open the front door of the vehicle and start disassembling the inner door panel, unscrewing all the fixing screws; then we disconnect the handle opening cable. At this point, we remove the inner panel, disconnecting the speaker connector; we unscrew the internal fixing screws of the lock, thus removing the entire module. We replace and install the new lock, following the video tutorial until the end!

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Lock Module of the Volkswagen Transporter
Replacing the Lock Module of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) In this guide, you will find instructions to replace the lock module and actuator of the Volkswagen Transporter. First, open the front driver's door …
How do you deactivate the passenger airbag of the Volkswagen Transporter?
How do you deactivate the passenger airbag of the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / MK 6, T6) To deactivate the passenger airbag of the Volkswagen Transporter, you need to open the front passenger door so that you can access the corresponding …
How to Disable the Passenger Airbag on a Volkswagen Transporter
How to Disable the Passenger Airbag on a Volkswagen Transporter
Volkswagen Transporter (2014-2025 / MK 6, T6) You can disable the passenger airbag on a Volkswagen Transporter by opening the front passenger door to access the corresponding side of the dashboar…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos