Do it yourself
Frequently asked questions about cars and motorcycles

Installation of the Thule awning on a Volkswagen Transporter T6

Model: Volkswagen Transporter MK 6, T6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Body

See other generations:
Video tutorial

In this video, we see how to install an awning on a Volkswagen Transporter T6: these awnings can easily be found online, and depending on the type, size, and other specifications, they have variable prices - however, they are generally high due to their high quality - so we do not give purchasing recommendations, as they are highly customizable to individual needs.

We start by taking measurements from the edge of the body, where we will drill two pilot holes with a 10 mm drill bit. We apply primer to the holes and then silicone.

It is then time for the nuts for the roof support brackets: these also need to be coated with silicone. We place washers, then the bracket, and tighten the bolts with the nuts.

On the horizontal brackets, we now place the vertical ones, which will support the awning. We screw them onto the bases we had previously positioned, and now we can install the awning package, bolting it to the top of the two brackets.

We further secure it with self-tapping screws. Now all that remains is to put a seal at the bottom so that when it rains heavily, there are no splashes under the awning.


Posted on 17 October 2025 by ScegliAuto


Related tutorials

Volkswagen Transporter (2014-2025 / MK 6, T6) In this short guide, we will see how to access the internal fuses of the Volkswagen Transporter, by installing the Dash Cam and connecting it to the …
Volkswagen Transporter (2014-2025 / MK 6, T6) To replace the headlight bulb on the Volkswagen Transporter, open the bonnet to access the components inside the engine compartment: here you will fi…
Volkswagen Transporter (2003-2014 / T5, MK 5) Today, we will discover the main instructions for installing the armrest on the driver's seat of the Volkswagen Transporter, in simple and quick step…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to reset the tyre pressure light on the Toyota Yaris Hybrid?

To completely turn off the tyre pressure light on the Toyota Yaris Hybrid, inflate the tyres until they reach the recommended pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once inflated, insert the ignition key into the ignition barrel. The dashboard should be on, and you can press the SET button located at the bottom of the dashboard under the steering column, which will turn off the light.

Watch the video!


by ScegliAuto

More videos