Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the AdBlue Tank in the Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: AdBlue warning light

To replace the AdBlue tank in the vehicle, you need to know that it is located above the diesel tank and therefore under the rear boot floor. To access it, first lift the car on a ramp, then remove the metal protective cover of the tank, and underneath it, you will find the diesel tank. Proceed to remove the tank itself, using a hoist to support it. Once the diesel tank is freed and lowered, you will find the small AdBlue tank above it.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the AdBlue Tank from a Peugeot 3008?
How to Remove the AdBlue Tank from a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) To remove the AdBlue tank from a Peugeot 3008, you need to access the underside of the vehicle, near the rear right wheel. Here, next to the fuel tan…
How do you fill the AdBlue tank in a Peugeot 3008 2.0 HDi?
How do you fill the AdBlue tank in a Peugeot 3008 2.0 HDi?
Peugeot 3008 (2009-2016 / T84, MK 1) To fill up the AdBlue tank of your car, start by opening the vehicle's hood. You will find the AdBlue tank cap separate from the fuel tank, usually o…
How to Top Up AdBlue in a Peugeot 3008
How to Top Up AdBlue in a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Topping up AdBlue in a Peugeot 3008 is straightforward. Obtain a canister of AdBlue additive from an auto parts store or a supermarket. Alternatively…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the AdBlue warning light on the Peugeot 3008 indicate? Read answer
    • 3008 2016-2023 - What are the problems of AdBlue on the Peugeot 3008? Read answer
    • 3008 2016-2023 - How to reset the AdBlue warning light in the Peugeot 3008? Read answer
    • 3008 2009-2016 - How many liters of AdBlue does the Peugeot 3008 contain? Read answer
    • 3008 2016-2023 - Where is the Peugeot 3008 AdBlue tank located? Read answer

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos