Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 2, P84
- Years 2016-2023 In order to remove the Peugeot 3008 AdBlue tank, you need to access the lower part of the car, at the right rear wheel. Here, next to the fuel tank, you will find the tank containing the additional AdBlue liquid, which will be fixed by means of special bolts. By unscrewing these bolts and disconnecting pipes and connectors, it will be possible to go and completely remove the tank, so that a new spare part can be installed. This will then have to be properly positioned, bolted and connected.
Posted on 4 October 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |