Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the AdBlue Tank on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Checks and maintenance

To replace the AdBlue tank on a Peugeot 3008, access the lower part of the vehicle, near the diesel particulate filter. Here, disconnect all connectors attached to the tank containing the AdBlue; next, remove all the securing bolts of the tank so that it can be taken out. After removing the tank, open it and replace the AdBlue bag, then reposition it in its place; finally, secure it with the bolts and reconnect the connectors.

Updated on 17 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the AdBlue Tank from a Peugeot 3008?
How to Remove the AdBlue Tank from a Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) To remove the AdBlue tank from a Peugeot 3008, you need to access the underside of the vehicle, near the rear right wheel. Here, next to the fuel tan…
How to Replace the AdBlue Tank in the Peugeot 3008
How to Replace the AdBlue Tank in the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) To replace the AdBlue tank in the vehicle, you need to know that it is located above the diesel tank and therefore under the rear boot floor. To acce…
How do you fill the AdBlue tank in a Peugeot 3008 2.0 HDi?
How do you fill the AdBlue tank in a Peugeot 3008 2.0 HDi?
Peugeot 3008 (2009-2016 / T84, MK 1) To fill up the AdBlue tank of your car, start by opening the vehicle's hood. You will find the AdBlue tank cap separate from the fuel tank, usually o…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the message "Anti-pollution system fault" mean in the Peugeot 3008? Read answer
    • 3008 2009-2016 - Why does the display of the Peugeot 3008 not work? Read answer
    • 3008 2016-2023 - Why does the Peugeot 3008 screen not light up? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos