|
Do it yourself
| |||
| ||||
Adjusting the Handbrake on a Ford Ecosport
Model: Ford Ecosport
BK, MK 1
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
First, remove the plastic trim at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to unclip it. There is no need to remove it completely; just move it forward to avoid obstruction. Now remove the central plastic console around the handbrake, starting from the rear to unclip it and lifting it until the handbrake lever passes through. Again, it is not necessary to remove it entirely, but be careful with the connected cables, as it can be placed in front of the passenger seat. At this point, notice that at the base of the handbrake lever, on the front side, there is a nut. By acting on it with a 10mm spanner, you can adjust the handbrake force, increasing it by turning the nut clockwise or decreasing it by turning it anti-clockwise. Once adjusted, you can reposition the central console first by applying slight pressure to clip it back in, and then the trim at the base of the gear lever.
Updated on 22 May 2026 by ScegliAuto
Related tutorials
Ford Ecosport
(2012-2023 /
BK, MK 1)
To adjust the handbrake of the Ford Ecosport, pull the lever fully so that the internal plastic part of the handbrake is accessible. At the end of th…
Ford Ecosport
(2012-2023 /
BK, MK 1)
In this video, we see how to adjust the handbrake of a 2015 Ford Ecosport: we need to pull up the gear shift boot so that we can remove the center co…
Ford Ecosport
(2012-2023 /
BK, MK 1)
Adjusting the handbrake tension of a 2012 Ford Ecosport vehicle is a simple and quick operation that can be done independently. To perform this opera…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
