Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Parking brake

Ford Ecosport - Parking brake

Parking Brake Ford Ecosport (2012-2023 / bk, mk 1)

Ford Ecosport (2012-2023 / BK, MK 1)
How to adjust the handbrake of the 2012 Ford Ecosport
Adjusting the handbrake tension of a 2012 Ford Ecosport vehicle is a simple and quick operation that can be done independently. To perform this operation, we …Read all…
Posted on 28 June 2025 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
How to adjust the handbrake of a Ford Ecosport
In this video, we see how to adjust the handbrake of a 2015 Ford Ecosport: we need to pull up the gear shift boot so that we can remove the center console, …Read all…
Posted on 24 April 2025 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
How to Adjust the Handbrake of the Ford Ecosport?
To adjust the handbrake of the Ford Ecosport, pull the lever fully so that the internal plastic part of the handbrake is accessible. At the end of this part, …Read all…
Posted on 27 October 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
Adjusting the Handbrake on a Ford Ecosport
First, remove the plastic trim at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to unclip it. There is no need to …Read all…
Posted on 18 July 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
Adjusting the Handbrake on Ford EcoSport
Position yourself at the front right wheel and remove the bolts, as shown in the video. Lower the handbrake inside the cabin. Then remove the wheel, take off …Read all…
Posted on 29 March 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (8) Spark plugs (2) Body (7) Key (37) Trunk lock (2) Timing belt (5) Air conditioner (1) Checks and maintenance (10) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (4) Fog lights (4) Air filter (6) Cabin air filter (20) Diesel fuel filter (1) Oil filter (1) Parking brake (5) Grille (2) Window switch (1) Light bulb (2) Headlight bulb (15) Tail light bulb (8) Interior dome light bulb (2) Handle (1) Starter motor (1) Engine oil (4) Clock (5) Door trim panel (11) Front bumper (1) Brake pads (2) Car door (4) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (21) Seat (1) Door lock (1) Side mirror (4) Warning light – error code (15) Tire pressure warning light (24) Service warning light (58) Brake drums and shoes (1) Fuel cap (3) Center console tunnel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos