Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Fog lights

Ford Ecosport - Fog lights

Ford Ecosport (2012-2023 / MK 1, BK)
Ford Ecosport front fog lamp replacement
Let's see in this guide the main steps that will allow us to remove and replace the front fog light and its bulb of the Ford Ecosport. First of all, let's move …read all…
Posted on 15 October 2022 by ScegliAuto
Ford Ecosport (2012-2023 / MK 1, BK)
How to replace the Ford Ecosport fog light bulb?
In order to replace the Ford Ecosport fog light bulb, you need to lift the hood, so that you can access the components inside the engine compartment. On the …read all…
Posted on 1 May 2024 by ScegliAuto
Ford Ecosport (2012-2023 / MK 1, BK)
How to replace the fog light bulb on a Ford Ecosport?
Using a thin but strong tool and prying, let's start by disengaging and removing the frame positioned around the fog light. By doing so, we will have reached …read all…
Posted on 15 January 2024 by ScegliAuto
Airbags (1) Car stereo (5) Battery (8) Spark plugs (2) Control unit (1) Key (19) Locking the trunk (2) Timing belt (4) -board computer (5) Checks and maintenance (44) Brake discs (2) Headlight (1) Tail light (2) Fog lights (3) Air filter (1) Cabin air filter (17) Diesel filter (1) Oil filter (1) Hand brake (3) Grille (2) Window lift switch (1) Light bulb (1) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (2) Handle (1) Engine (1) Engine oil (4) Door panel (8) Front bumper (1) Tires (3) Push button (1) Instrument cluster (7) Fuse box (8) Seat (1) Lock (1) Outside rearview mirror (2) Drums and shoes (1) Central tunnel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos