Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Brake rotors

Ford Ecosport - Brake rotors

Brake Rotors Ford Ecosport (2012-2023 / bk, mk 1)

Ford Ecosport (2012-2023 / BK, MK 1)
Replacing the Front Brake Disc on the Ford Ecosport
Today, we will go through the main steps for removing and replacing the front brake disc and pads on the Ford Ecosport. First, raise the vehicle and start by …Read all…
Posted on 20 September 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
Replacing the Front Brake Discs on a Ford Ecosport
In today's video tutorial, we will see how to dismantle and replace the front brake discs and pads on the first series Ford Ecosport, in simple steps. First, …Read all…
Posted on 10 August 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (8) Spark plugs (2) Body (7) Key (37) Trunk lock (2) Timing belt (5) Air conditioner (1) Checks and maintenance (10) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (4) Fog lights (4) Air filter (6) Cabin air filter (20) Diesel fuel filter (1) Oil filter (1) Parking brake (5) Grille (2) Window switch (1) Light bulb (2) Headlight bulb (14) Tail light bulb (8) Interior dome light bulb (2) Handle (1) Starter motor (1) Engine oil (4) Clock (5) Door trim panel (11) Front bumper (1) Brake pads (2) Car door (4) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (20) Seat (1) Door lock (1) Side mirror (4) Warning light – error code (15) (18) Tire pressure warning light (6) Service warning light (56) Brake drums and shoes (1) Fuel cap (3) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos