Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Discs on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Brake rotors

In today's video tutorial, we will see how to dismantle and replace the front brake discs and pads on the first series Ford Ecosport, in simple steps. First, lift the vehicle and remove the front wheel; then remove the metal clip from the brake caliper and unscrew the bolts at the back to remove it, as shown in the video. Next, remove the caliper bracket, then unscrew the bolts securing the brake disc; remove it and replace it with the new one, ensuring it is the correct type and an original part, following the video through to the end!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Remove the Rear Door Panel of a Ford Ecosport
How to Remove the Rear Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the rear door of your Ford Ecosport. Begin by disengaging and removing the inserts from the door panel. Next, unscrew and …
How to Open the Bonnet of a Ford Ecosport
How to Open the Bonnet of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, sit in the driver's seat of your Ford Ecosport. Begin by pulling the handle located near the lower left side of the steering column.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos