Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Fog lights

In this guide, we will go through the main steps to remove and replace the front fog light and its bulb on the Ford Ecosport. First, move to the front wheel arch and start by unscrewing the fixing screws of the fog light to remove the unit from the front bumper; then, pull out the cable along with the bulb, disconnecting the electrical connector to replace it with a new one, as illustrated in the video. At this point, install the new bulb in the fog light and reassemble everything by applying the reverse procedure!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog light bulb of the Ford Ecosport
Replacement of the front fog light bulb of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show us how to disassemble and replace the front fog light bulb of the Ford Ecosport. First, let's move to the front of the…
How to Replace the Headlight Bulb on the Ford Ecosport?
How to Replace the Headlight Bulb on the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) The presented video shows and verbally describes how to replace a headlight bulb on the Ford Ecosport. First, ensure the instrument panel is off, the…
How to Open the Rear Door of a Ford Ecosport
How to Open the Rear Door of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) The rear door of the Ford Ecosport opens sideways, meaning it opens in the same direction as the side doors of the car. The handle for opening is loc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos