Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Front Bumper on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

Today, in this simple guide, you will learn how to dismantle and possibly replace the front bumper on the first series Ford Ecosport. First, open the vehicle's bonnet and start by removing the front lights by unscrewing the screws located at the top; then disconnect the electrical cables for the bulbs.

At this point, unscrew the screws found on both sides of the wheel arches and gently unclip the bumper from the sides; now unscrew all the screws found above and below the bumper to remove it completely, as shown in the video!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light Bulb on the Ford Ecosport
Replacing the Front Fog Light Bulb on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show you how to dismantle and replace the front fog light bulb on the Ford Ecosport. First, move to the front of the vehicl…
Replacing the Front Fog Light on the Ford Ecosport
Replacing the Front Fog Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this guide, we will go through the main steps to remove and replace the front fog light and its bulb on the Ford Ecosport. First, move to the fron…
How to Replace the Fog Light Bulb on a Ford EcoSport?
How to Replace the Fog Light Bulb on a Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos