Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Ford EcoSport?

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fog lights

See other generations:
Video tutorial

To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the connector attached to the fog light, which must be disconnected. This will allow you to extract the old bulb from its housing, enabling you to connect a new one to the corresponding connector.

Then, insert the bulb back into the fog light to ensure it functions correctly.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on a Ford Ecosport
How to Replace the Fog Light Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Using a thin but sturdy tool and leveraging, start by unclipping and removing the trim surrounding the fog light. By doing this, you will reach the s…
How to Replace the Fog Light Bulb on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) How to replace the fog light bulb? It's quite simple with this short guide for a quick replacement. First, engage the handbrake for safety. Open the …
Replace the Headlight Bulbs on Ford Ecosport
Replace the Headlight Bulbs on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace the bulbs on a Ford Ecosport, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Once you fi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos