Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fog lights

See other generations:
Video tutorial

Using a thin but sturdy tool and leveraging, start by unclipping and removing the trim surrounding the fog light. By doing this, you will reach the screws that secure the fog light to the car, which you will need to unscrew and remove.

Once you have removed the fastening screws, you can extract the lamp unit and access the rear connector of the blown bulb. Proceed to unclip the connector and the corresponding bulb, then remove the bulb itself, and you will have completed the disassembly.

To fit the new bulb and reassemble the fog light, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on a Ford EcoSport?
How to Replace the Fog Light Bulb on a Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the…
How to Replace the Fog Light Bulb on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) How to replace the fog light bulb? It's quite simple with this short guide for a quick replacement. First, engage the handbrake for safety. Open the …
How to Replace the Front Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Replacing the front headlamp bulb on your Ford Ecosport is a straightforward task that takes only a few minutes, even for those without much experien…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos