Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fog Light Bulb on Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
This video is currently unavailable

How to replace the fog light bulb? It's quite simple with this short guide for a quick replacement. First, engage the handbrake for safety.

Open the bonnet and remove the headlight assembly, which is secured to the vehicle with just two screws. One is near the windscreen washer reservoir, on the bodywork.

The other is lower down, next to where the bonnet rests. Now lift the headlight and locate the safety cap for the fog light bulb.

Remove it and replace the bulb with a new one. Refit the cap, then reassemble the headlight unit.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Ford Ecosport (2012-2023 / BK, MK 1) To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the…
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show you how to dismantle and replace the front fog light bulb on the Ford Ecosport. First, move to the front of the vehicl…
Ford Ecosport (2012-2023 / BK, MK 1) In this guide, we will go through the main steps to remove and replace the front fog light and its bulb on the Ford Ecosport. First, move to the fron…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos