Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Headlight

This video shows how to remove (and replace) the front headlamps of a Ford Ecosport. First, open the bonnet and unscrew the screws that secure the front headlamp to the compartment. Next, disconnect the relevant connector and extract the entire front headlamp. At this point, you can decide whether to replace just the bulbs or the entire old headlamp with a new one. If you choose the latter, all you need to do to reassemble everything is place the part back in position, reconnect the connector, and finally, screw in the screws.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Replacing the front headlamp bulb on your Ford Ecosport is a straightforward task that takes only a few minutes, even for those without much experien…
How to Replace the Front Headlamp Bulb on a Ford Ecosport
How to Replace the Front Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace the front headlamp bulb on a Ford Ecosport, open the bonnet and reach the back of the affected headlamp unit. After removing the rubber or…
How to Change the Rear Headlamp Bulb on a Ford Ecosport
How to Change the Rear Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) How to change the rear headlamp bulb on a Ford Ecosport? This operation is very simple; follow these steps to remove the headlamp. Open the boot lid;…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos