Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Headlight

In the following guide aimed at all of you who own a second-generation Ford Ecosport, we will help you complete the procedure for removing the front headlight of the vehicle. First of all, make sure you have parked the car safely and turned it off completely, then lift the hood and locate the cable connected to the interior headlight you want to remove. Next, disconnect the cable in question and pull the headlight outward until it is completely detached. At this point, the procedure is successfully completed, and you can optionally install a new headlight.

Posted on 24 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Lights on Ford Ecosport
How to Replace the Position Lights on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace any bulb on a Ford Ecosport, as with many car models, you must first remove the headlamp along with its entire assembly. To do this, a ver…
Replacement of the front fog light bulb of the Ford Ecosport
Replacement of the front fog light bulb of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show us how to disassemble and replace the front fog light bulb of the Ford Ecosport. First, let's move to the front of the…
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos