Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Headlamp Bulb on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

How to change the rear headlamp bulb on a Ford Ecosport? This operation is very simple; follow these steps to remove the headlamp. Open the boot lid; remove the cover from the side trim of the boot.

Unscrew the retaining nuts of the rear headlamp, disconnect the power connectors attached to the headlamp, and pull it out from its housing. Replace the damaged bulbs with new ones once the headlamp is removed (same voltage).

Refit the headlamp with the respective retaining nuts; reattach the fabric inspection cover and test the correct operation of the lights.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Open the Boot Lid on a Ford Ecosport?
How to Open the Boot Lid on a Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) In this short and simple video, see how to manually open the rear boot lid of the first-generation Ford Ecosport in its facelift version (also applic…
How to open the boot of the Ecosport
How to open the boot of the Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) This video shows how to open the rear tailgate of the Ford Ecosport: it may seem straightforward, but it is not, as it is a somewhat unique tailgate.…
How to Replace the Fog Light Bulb on a Ford EcoSport?
How to Replace the Fog Light Bulb on a Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the fog light bulb on a Ford EcoSport, lift the bonnet to access the components inside the engine bay. Inside the front bumper, locate the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos