Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on the Ford EcoSport?

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Light bulb

To replace the rear headlight bulbs on the Ford EcoSport, first open the small hatch located inside the boot, right at the height of each headlight. Inside, you will see a long yellow screw that needs to be unscrewed and removed. Next, remove the two Torx T25 screws located on the outer part of the headlight and pull it towards you to disengage it from its housing, being careful not to pull too hard on the cable. Disconnect the connector and finally remove the three Torx screws that hold the base where the bulbs are inserted. To remove a bulb, simply rotate it counterclockwise.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Headlight Bulbs on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Are the front headlight bulbs blown? Let's replace the front headlight bulbs. Open the bonnet by pulling the lever located at the bottom right of the…
Replace the Headlight Bulbs on Ford Ecosport
Replace the Headlight Bulbs on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace the bulbs on a Ford Ecosport, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Once you fi…
How do you open the rear tailgate of the Ford Ecosport?
How do you open the rear tailgate of the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) A question that often arises is: how do you open the rear hatch of the Ford Ecosport? In fact, it does not open from the handle located under the lic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos