Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Light bulb

Ford Ecosport - Light bulb

Light Bulb Ford Ecosport (2012-2023 / bk, mk 1)

Ford Ecosport (2012-2023 / BK, MK 1)
How to replace the courtesy light bulb of the external rearview mirror of the 2018 Ford Ecosport
The steps to replace the courtesy light bulb of the external rearview mirror are easy to perform independently. The first step is to remove the mirror from the …Read all…
Posted on 24 July 2025 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
How to Replace the Rear Headlight Bulbs on the Ford EcoSport?
To replace the rear headlight bulbs on the Ford EcoSport, first open the small hatch located inside the boot, right at the height of each headlight. Inside, …Read all…
Posted on 14 July 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (8) Spark plugs (2) Body (7) Key (37) Trunk lock (2) Timing belt (5) Air conditioner (1) Checks and maintenance (10) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (4) Fog lights (4) Air filter (6) Cabin air filter (20) Diesel fuel filter (1) Oil filter (1) Parking brake (5) Grille (2) Window switch (1) Light bulb (2) Headlight bulb (14) Tail light bulb (8) Interior dome light bulb (2) Handle (1) Starter motor (1) Engine oil (4) Clock (5) Door trim panel (11) Front bumper (1) Brake pads (2) Car door (4) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (20) Seat (1) Door lock (1) Side mirror (4) Warning light – error code (15) (18) Tire pressure warning light (6) Service warning light (56) Brake drums and shoes (1) Fuel cap (3) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos