Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Engine oil

Ford Ecosport - Engine oil

Engine Oil Ford Ecosport (2012-2023 / bk, mk 1)

Ford Ecosport (2012-2023 / BK, MK 1)
How to Change the Engine Oil and Oil Filter on a Ford Ecosport 2.0L
Today, we will look at how to perform routine maintenance by changing the engine oil and oil filter on a Ford Ecosport 2.0L. First, raise the vehicle and start …Read all…
Posted on 5 June 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
Replacing the Engine Oil and Oil Filter on the Ford Ecosport
Let’s go through the procedure necessary to replace the engine oil and oil filter on the Ford Ecosport during routine maintenance. First, lift the vehicle …Read all…
Posted on 30 August 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
Engine Oil Change on a Ford Ecosport
Lift the front of the vehicle with one or two jacks. Open the bonnet, prop it up, and unscrew the cap of the engine oil compartment, where you will add the new …Read all…
Posted on 8 May 2026 by ScegliAuto
Ford Ecosport (2012-2023 / BK, MK 1)
How to Change the Engine Oil in a Ford Ecosport
How do you change the engine oil in a Ford Ecosport? This is a simple operation if you follow the correct steps. Lift the car on a column lift, use a socket …Read all…
Posted on 3 April 2026 by ScegliAuto
Airbag (1) Car stereo (5) Battery (8) Spark plugs (2) Body (7) Key (37) Trunk lock (2) Timing belt (5) Air conditioner (1) Checks and maintenance (10) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (4) Fog lights (4) Air filter (6) Cabin air filter (20) Diesel fuel filter (1) Oil filter (1) Parking brake (5) Grille (2) Window switch (1) Light bulb (2) Headlight bulb (15) Tail light bulb (8) Interior dome light bulb (2) Handle (1) Starter motor (1) Engine oil (4) Clock (5) Door trim panel (11) Front bumper (1) Brake pads (2) Car door (4) Push button (1) Instrument cluster (1) Wheel (1) Fuse box (21) Seat (1) Door lock (1) Side mirror (4) Warning light – error code (15) Tire pressure warning light (24) Service warning light (58) Brake drums and shoes (1) Fuel cap (3) Center console tunnel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos