Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Engine oil

How do you change the engine oil in a Ford Ecosport? This is a simple operation if you follow the correct steps. Lift the car on a column lift, use a socket spanner to unscrew the oil sump bolt, allowing the liquid to drain into a disposal container, then refit the oil sump bolt. Lower the vehicle to the ground and lift the bonnet, securing it. Remove the oil filter and the air filter (located in the engine bay). Finally, fit the new filters and top up with the new oil. Check the fluid levels at the end of the maintenance.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Ford Ecosport 2.0L
How to Change the Engine Oil and Oil Filter on a Ford Ecosport 2.0L
Ford Ecosport (2012-2023 / BK, MK 1) Today, we will look at how to perform routine maintenance by changing the engine oil and oil filter on a Ford Ecosport 2.0L. First, raise the vehicle…
How to Reset the Engine Oil Change Light on the Ford Ecosport
How to Reset the Engine Oil Change Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Follow these simple instructions to reset the service light for the engine oil change on the Ford Ecosport. First, get into the vehicle and turn on t…
Replacing the Engine Oil and Oil Filter on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Let’s go through the procedure necessary to replace the engine oil and oil filter on the Ford Ecosport during routine maintenance. First, lift the ve…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos