Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Air Filter on a Ford EcoSport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter on a second-generation Ford EcoSport, turn off the engine, wait for it to cool, and open the bonnet. Locate the air filter box in the engine compartment, connected to the intake duct.

Loosen the screws securing the airbox cover, and if necessary, free any hoses or components that hinder its removal. Open the housing and extract the old filter element, paying attention to its position.

Remove any dust, leaves, and debris from the box without letting them enter the intake duct. Insert the new filter in the same position, ensuring the edge fits evenly in the seat.

Refit the cover, tighten the screws, and reconnect any components removed. Finally, check that the airbox is properly closed and that the intake duct is securely fastened.


Posted on 3 September 2026 by ScegliAuto


Related tutorials

Ford Ecosport (2012-2023 / BK, MK 1) Before you start, exit the cabin of your Ford Ecosport and head to the rear boot lid. Begin by grasping and pulling the handle located inside the rig…
Ford Ecosport (2012-2023 / BK, MK 1) This tutorial shows how to replace the interior lights in a Ford EcoSport, a simple and quick task. Before proceeding, ensure that the key is not in …
Ford Ecosport (2012-2023 / BK, MK 1) In this video, see how to replace the battery in a Ford EcoSport key. First, get a small flathead screwdriver. Use the screwdriver to pry off the cov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos