Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Engine oil

Lift the front of the vehicle with one or two jacks. Open the bonnet, prop it up, and unscrew the cap of the engine oil compartment, where you will add the new lubricant at the end of the procedure. After opening the oil compartment in the bonnet, move to the underside of the car and unscrew the bolt that serves as the plug for the drain hole, as shown in the video (be careful as the oil will start to flow immediately). Collect the used lubricant in a container and dispose of it properly. Close the drain hole by re-screwing the bolt and refill from the top with 5W-30.

Updated on 5 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the oil light on the Ford Ecosport
How to reset the oil light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) On the instrument panel of the Ford Ecosport, the oil light has come on, indicating that it is necessary to replace the engine oil. Only after replac…
How to Reset the Engine Oil Change Light on the Ford Ecosport
How to Reset the Engine Oil Change Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Follow these simple instructions to reset the service light for the engine oil change on the Ford Ecosport. First, get into the vehicle and turn on t…
Resetting Service Light on Ford Ecosport
Resetting Service Light on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this simple and brief video guide, you will see the necessary instructions to reset the service light for the routine maintenance oil change on a …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos