Do it yourself
Frequently asked questions about cars and motorcycles

How to adjust the handbrake of the 2012 Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Parking brake

See other generations:
Video tutorial

Adjusting the handbrake tension of a 2012 Ford Ecosport vehicle is a simple and quick operation that can be done independently. To perform this operation, we need to get on board the vehicle and sit on the rear seats.

Remove the plastic cover of the handbrake and using a 10mm insert key, tighten the bolt located on the handbrake. The tighter we tighten the bolt, the more tension in the brake will increase.

After completing this step, move to the front seats to test the handbrake operation by engaging it. If the handbrake still has low tension, it will be necessary to go to the workshop.


Posted on 27 June 2025 by ScegliAuto


Related tutorials

Ford Ecosport (2012-2023 / BK, MK 1) To adjust the handbrake of the Ford Ecosport, pull the lever fully so that the internal plastic part of the handbrake is accessible. At the end of th…
Ford Ecosport (2012-2023 / BK, MK 1) In this video, we see how to adjust the handbrake of a 2015 Ford Ecosport: we need to pull up the gear shift boot so that we can remove the center co…
Ford Ecosport (2012-2023 / BK, MK 1) Position yourself at the front right wheel and remove the bolts, as shown in the video. Lower the handbrake inside the cabin. Then remove the wheel, …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos