Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video we see how to disassemble the shell of the external rearview mirror of most recent Renault vehicles. Using a plastic spatula, we pry behind the mirror to remove it from its housing: if necessary, we can use a small screwdriver. We remove the electrical connector, and then, always with our spatula, we pry to remove the shell: we will have to separate the pins from the housing that attaches to the mirror, which are located one on the top and one on the side. They are very fragile tabs that can easily break. To put the shell back in place, we start by positioning the lower pin and then we support the sides, interlocking them. Now we put back the mirror, starting by inserting the electrical connector and then inserting the glass by pressing in the center.
Posted on 17 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |