Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check a fuse without removing it

Model: (Various brands) Various
Part: Fuse box

In this video we see how to check the functionality of a fuse without removing it; the most practical thing is to check it from the blades using a test light, first from the positive side and then from the opposite side to see if there is continuity. However, the test light is not always reliable; if we want to be 100% sure, the best system is to use a multimeter, set to "continuity" mode, so if the two probes short circuit, it emits a sound, so by placing both probes on the positive and negative poles, we hear that there is continuity and therefore the fuse is good; otherwise it would mean that the blade has been interrupted. This operation can be done without removing it from its housing, so without risking to erase some components.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Status of a Fuse
How to Check the Status of a Fuse
(Various brands) Various Today, we will see how to check the status of a car fuse. Inside the vehicle, there are usually two fuse boxes, located in the cabin and under the bo…
How to Test a Fuse Without Tools
How to Test a Fuse Without Tools
(Various brands) Various In this video, we will demonstrate an empirical method to test fuses without measuring tools. You will need a common plastic ballpoint pen, a small p…
An emergency way to remove the fuses from our car.
An emergency way to remove the fuses from our car.
(Various brands) Various What we see in the video is a well-known emergency trick among mechanics and enthusiasts. You just need to have a burnt fuse of the same size as the …

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos