Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on a Volkswagen Touareg?

Model: Volkswagen Touareg MK 2, 7P - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the brake pads on a Volkswagen Touareg, start by lifting the car with a jack to create space underneath the vehicle. Ensure the car is on a flat and secure surface before beginning.

Then locate the wheel you wish to work on and remove the wheel bolts using a ratchet or a cross wrench. Once the bolts are removed, take off the wheel to access the braking system.

You will now see the brake disc and the brake pads. Using a screwdriver or pliers, remove the retaining pins of the brake pads and slide the old pads out of the brake supports.

Before installing the new pads, ensure to push the brake pistons back into the brake supports using a brake caliper tool or a screwdriver. This will create space for the new pads.

Now, insert the new pads into the brake supports and reinstall the retaining pins. At this point, you will need to remount the wheel and tighten the bolts securely, and you will have completed the replacement.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

Volkswagen Touareg (2010-2018 / MK 2, 7P) In this video tutorial, you will learn how to remove and replace the front brake pads and discs on a Volkswagen Touareg. First, lift the vehicle and …
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the front brake pads on a Volkswagen Touareg, lift the vehicle using a jack or ramp to access the bolts securing the corresponding front w…
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the rear brake pads on the Volkswagen Touareg, lift the vehicle so that the rear wheel is off the ground. Then, unscrew the bolts securing…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos