Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the center cap of the Volkswagen Touareg wheel

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Wheel

Today we will see the instructions that will allow us to disassemble and replace the central cap of the Volkswagen Touareg wheel. First of all, let's approach the wheel and start levering on the side of the cap until it comes off and remove it; if it is difficult to remove, then it may be necessary to drill it with a drill bit, then insert a pointed tool to pull it, as shown in the video. At this point, install the new wheel cap, fixing it correctly; replace all the other wheel caps in the same way!

Posted on 4 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up AdBlue on the Volkswagen Touareg
How to Top Up AdBlue on the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) To top up AdBlue on the Volkswagen Touareg, open the rear hatch to access the components located inside the boot: here, you will need to lift the car…
How to Reset the AdBlue Warning Light on the Volkswagen Touareg?
How to Reset the AdBlue Warning Light on the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To reset the AdBlue warning light on the Volkswagen Touareg, open the rear hatch and remove the carpet at the base of the boot. Once the carpet is re…
How to Reset the AdBlue Warning Light on the Volkswagen Touareg
How to Reset the AdBlue Warning Light on the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) If the AdBlue warning light has illuminated on the dashboard of your Volkswagen Touareg, it means that the emissions fluid is low and needs to be top…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos