Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the VW Golf VI.

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Headlight bulb

Today we will explain how to replace the headlight bulb of the Volkswagen Golf VI. To replace the bulb, we need to remove the headlight, so we remove the clips on the fender and loosen the lower part of the bumper. We unscrew the upper and lower screws of the headlight to remove it from its housing. We remove the dome light cover and proceed with the replacement of the bulb. We disconnect the connector from the bulb and connect the new one. We close the dome light cover and insert the headlight back into its housing. We reassemble the previously removed parts and close the hood.

Posted on 14 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlight bulb of the Volkswagen Golf 6, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
How to replace the front headlight bulb of the VW Golf 5
How to replace the front headlight bulb of the VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Burned out bulb? Today we explain how to replace it! Replacing the headlight bulb of the Volkswagen Golf 5 is a simple and quick operation to do inde…
Replace Front Headlamp Bulb on Golf 4
Replace Front Headlamp Bulb on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Is the front headlamp bulb on your Golf 4 blown? Let's replace it. Open the bonnet by pulling the lever located at the bottom right of the dashboard …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos