Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on a Volkswagen Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Light bulb

See other generations:
Video tutorial

In today's tutorial, learn how to replace the dipped beam bulb of the front headlight on a Volkswagen Golf, third generation model produced from 1991 to 1997. Start the procedure by opening the front bonnet of your vehicle, then unscrew and remove the bulb cover located at the rear of the headlight as shown in the video.

After that, disconnect the connector from the bulb and release its metal retaining clip to extract it completely.

Finally, fit a new dipped beam bulb following the reverse procedure.


Posted on 26 February 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulb on VW Golf 5
Replacing Front Headlamp Bulb on VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replacing the blown bulb in the front headlamp of a Volkswagen Golf 5? Here’s how to remove and replace it. Open the front bonnet by pulling the leve…
Changing Front Headlight Bulbs on Volkswagen Golf 7
Changing Front Headlight Bulbs on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Do you want to remove the front headlight bulbs from your Golf 7? Here’s how to remove the bulbs inside the front headlight of the car. Open the bonn…
Replacing the Front Bulb on Golf 5
Replacing the Front Bulb on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Need to replace the damaged bulb in the front headlight of a Volkswagen Golf 5? Here’s how to do it. Open the front bonnet by pulling the lever locat…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos