Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb of the Volkswagen Golf

Model: Volkswagen Golf - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this short guide, discover the instructions on how to remove and replace the dipped beam bulb of the front headlamp of the Volkswagen Golf. First, open the vehicle's bonnet and gently detach the bumper on the sides by unscrewing the screws located in the wheel arch; unscrew all the screws of the headlight assembly to detach and remove it, disconnecting the electrical connector of the lights.

At this point, remove the plastic protective cover of the bulbs, take out the dipped beam bulb, and replace it with a new one (with the same fitting); then refit the front headlamp!


Posted on 4 November 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the dipped beam bulb on a Volkswagen Golf 7 is really straightforward, and we will show you how. Lift the bonnet securely. Access the rear …
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In a few simple steps, see how to replace the dipped beam bulb in the front headlamp of a Volkswagen Golf. First, open the bonnet of the vehicle and …
Replacing the Headlight Bulb on a Volkswagen Golf
Replacing the Headlight Bulb on a Volkswagen Golf
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) In today's tutorial, learn how to replace the dipped beam bulb of the front headlight on a Volkswagen Golf, third generation model produced from 1991…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos