Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb in the Front Headlamp of a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Headlight bulb

In a few simple steps, see how to replace the dipped beam bulb in the front headlamp of a Volkswagen Golf. First, open the bonnet of the vehicle and start by removing the plastic cover on the back of the headlamp; then unclip the metal spring and disconnect the electrical connector of the bulb to remove it, as shown in the video. At this point, install the new dipped beam bulb of the correct type (in this case with an H7 fitting); reattach the cover and check the light's operation!

Posted on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Replacing the Dipped Beam Bulb on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Replacing the dipped beam bulb on a Volkswagen Golf 7 is really straightforward, and we will show you how. Lift the bonnet securely. Access the rear …
Replacing Front Headlamp Bulb on Volkswagen Golf 6
Replacing Front Headlamp Bulb on Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today, you will learn how to remove and replace the front headlamp bulb on a Volkswagen Golf Mk6. First, open and lift the bonnet of your car; then, …
Replacing the Front Headlamp Bulb on the Volkswagen Golf
Replacing the Front Headlamp Bulb on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Below are the steps on how to remove and replace the front headlamp bulb on the Volkswagen Golf. First, open the bonnet by pulling the lever from ins…

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos