Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the headlight bulb of a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Headlight bulb

We will briefly go through the steps to remove and replace the headlight bulb of a Volkswagen Golf. First, open the vehicle's bonnet and start by removing the plastic protective cap for the bulbs located behind the front light; then disconnect the electrical connector of the light by releasing the metal clip to remove the light, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; install the new light and check its correct operation.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Volkswagen Golf?
How to Replace the Front Headlight Bulb of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To replace the front headlight bulb of the Volkswagen Golf, open the bonnet to access the components inside the engine bay: here, you will need to de…
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlight bulb of the Volkswagen Golf 6, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlamp Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlamp bulb of the Volkswagen Golf 6, open the bonnet to access the back of the headlamp where the bulb needs to be replaced. …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos