Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the headlight bulb of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Headlight bulb

In this guide, we will see the instructions that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Volkswagen Golf. First, open the hood of the car and start removing the plastic bulb protection cap; then remove the bulb holder along with the bulb, disconnecting the power connector, as shown in the video. At this point, install the new bulb, of the correct type and having the same attachment; reassemble the bulb holder and check the operation of the bulb!

Posted on 15 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Volkswagen Golf?
How do you replace the headlight bulb of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) .. The replacement of the headlight bulb of the Volkswagen Golf is done by opening the hood, so that access.. …
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
How to Replace the Front Headlight Bulb of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the front headlight bulb of the Volkswagen Golf 6, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
Replacement of the front headlight bulb of the Volkswagen Golf
Replacement of the front headlight bulb of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below we will see the information on how to disassemble and replace the dipped beam bulb of the front headlight of the Volkswagen Golf. First, we ope…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos