Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the component protection of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

Today's video tutorial will show us how to disable the protection of the multimedia system components of the Volkswagen Golf. First, we get into the car and start by going to the service mode; then we press and hold the menu button until the testmode menu appears, as shown in the video. At this point, we follow the guided procedure to disable the protection of the multimedia system components; this operation can be done using specific diagnostic software, following the video tutorial until the end!

Posted on 19 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide, we will see the information that will allow us to deactivate the protection of the multimedia system components of the Volkswagen Golf…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions that will allow you to deactivate the component protection on a Volkswagen Golf when replacing with original spare parts. …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today we will see the main instructions that will allow us to deactivate the protection of components or safe lock of the Volkswagen Golf. In order t…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos