Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the component protection on the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this guide, we will see the information that will allow us to deactivate the protection of the multimedia system components of the Volkswagen Golf. First, we get into the car and start the ignition; then we turn on the radio, holding down the power button to perform a forced reset, as shown in the video. At this point, we turn on the radio and use the volume control to deactivate the protection of the components; sometimes this method does not allow the deactivation of the protection of the components, where it will be necessary to use a specific diagnostic software.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's video tutorial will show us how to disable the protection of the multimedia system components of the Volkswagen Golf. First, we get into the …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions that will allow you to deactivate the component protection on a Volkswagen Golf when replacing with original spare parts. …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide, we will see the necessary information to be able to unlock the protection of the components of the Volkswagen Golf car radio. The prot…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos