Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Volkswagen Caddy?

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Service warning light

It will be possible to completely remove the Service light from the instrument panel of the Volkswagen Caddy by going inside the cabin and holding down the button located at the bottom right of the instrument panel, labeled "0.0/SET". While holding down this button, you will need to turn on the instrument panel by turning the key. Once the instrument panel is turned on, you can release the button at the bottom right of the speedometer and press the button at the bottom left once. This will allow the Service light to turn off permanently and you can verify this by turning off and turning on the instrument panel again.

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…
Volkswagen Caddy (2020-2026 / SB) To reset the service light on a Volkswagen Caddy, turn on the instrument panel without starting the engine. On the central display, enter the main me…
Volkswagen Caddy (2020-2026 / SB) You can clear the Service light from the instrument panel of the Volkswagen Caddy by turning on the ignition, inserting the key into the ignition swi…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos