Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Tie Rod End on Volkswagen Sharan

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Control arm

See other generations:
Video tutorial

Learn how to remove the tie rod end on a Volkswagen Sharan. Position your car on a column lift and raise it to a comfortable height for access.

Use a socket or air impact wrench to remove the wheel nuts and take the wheel off. Next, start loosening the bolts on the tie rod end with a socket wrench. Remove the bolts located under the tie rod end (as shown in the video) and the stabiliser bar: pull the tie rod end away from the vehicle body by hand.

Fit the new steering tie rod end, then tighten it with all the associated bolts. Finally, refit the wheel with the nuts.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to disassemble the door panel of the Volkswagen Sharan
How to disassemble the door panel of the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) The instructions in this guide will show us how to disassemble and remove the front door panel of the Volkswagen Sharan. First, we open the front doo…
How to Remove the Door Panel of the Volkswagen Sharan
How to Remove the Door Panel of the Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) Follow these brief steps to remove and replace the front door panel of the Volkswagen Sharan. First, open the front door and start by removing the wi…
How to Reset the Service Light on the Volkswagen Sharan 2
How to Reset the Service Light on the Volkswagen Sharan 2
Volkswagen Sharan (2010-2023 / 7N, MK 2) In this mini guide dedicated to your Volkswagen Sharan second series, discover the steps you need to follow to manually reset the service light on th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos