Do it yourself
Frequently asked questions about cars and motorcycles

Diagram and layout of the fuses of the Volkswagen Caddy.

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

In this brief guide, we will see the diagram and layout of the fuse boxes of the Volkswagen Caddy. First, we open the car's engine hood and start removing the plastic cover found on the top right, thus accessing the external fuse box; we find the internal fuse box on the driver's side, removing the cover located under the steering wheel, as shown in the video.

The tables shown in the video illustrate the scheme and diagram of the fuses, associated with a code and the corresponding amperage; we replace any faulty fuses with new ones, always respecting the amperages.


Posted on 8 September 2025 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / 2K, MK 3) This brief guide covers the diagram and positioning of the fuse boxes for the Volkswagen Caddy. In the scrolling table shown in the video, you will f…
Volkswagen Caddy (2020-2026 / SB) Today's instructions will allow us to access the internal fuse box of the Volkswagen Caddy, also finding the fuse diagram and chart. First, we open t…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today's information will show us how to access the internal fuse box of the Volkswagen Caddy, also finding the fuse diagram and layout. First, we get…

Other guides you may be interested in

    Frequently Asked Questions

    • Caddy 2003-2020 - Where is the windshield washer pump fuse located in the Caddy? Read answer
    • Caddy 2003-2020 - Where is the Volkswagen Caddy central locking fuse located? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos