Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio on a Volkswagen Fox

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Car stereo

How to remove the original radio on a Volkswagen Fox? Carefully follow these steps for disassembly. Use the original or aftermarket metal keys to remove the stereo from your car. Insert the keys into the slots on either side of the plastic trim of the stereo; pull the stereo towards you as shown in the video, and extract the radio while being cautious of the various wiring (disconnect the power connectors and the antenna cable). Finally, refit the original radio or a generic brand with the appropriate adapter for the connection and wiring.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the factory radio of the Volkswagen Fox.
How to replace the factory radio of the Volkswagen Fox.
Volkswagen Fox (2003-2011 / MK 1) In this guide, we will see the instructions necessary to disassemble and replace the stock radio of the Volkswagen Fox. First, let's get inside the v…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Volkswagen Fox (2003-2011 / MK 1) To remove the car radio, you need the appropriate extraction keys: insert them into the designated slots at the four corners of the radio with the be…
Where Are the Fuses Located on the Volkswagen Fox?
Where Are the Fuses Located on the Volkswagen Fox?
Volkswagen Fox (2015-2021 / MK 2) All fuses on the Volkswagen Fox are located within the designated fuse boxes installed in the vehicle: in this model, you can find two boxes containi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos