Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Volkswagen Polo

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Door trim panel

Today's instructions will show us how to disassemble the door panel of the Volkswagen Polo. First, we open the door and start by removing the plastic cover of the handle; then we unscrew the fixing screws inside the handle, and then unscrew the screw at the bottom by 90 degrees, as shown in the video. At this point, we pry the sides of the panel to detach and remove it, disconnecting the handle cable and the electric connector of the window button; finally, we reassemble the door lining!

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel of a Volkswagen Polo
Removing the Front Door Panel of a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This guide illustrates how to disassemble and remove the front door panel of a Volkswagen Polo. First, open the front door of the vehicle and start r…
Removing the Front Door of the Volkswagen Polo
Removing the Front Door of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Below are the instructions to remove and replace the front door of the Volkswagen Polo. First, open the front door and start unscrewing the fixing sc…
How to Dismantle the Door Lock on a VW Polo
How to Dismantle the Door Lock on a VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) How to dismantle the left rear door lock on a Volkswagen Polo: disconnect the battery connectors located in the engine compartment, use a screwdriver…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos