Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Volkswagen ID.4?

Model: Volkswagen Id 4 MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

Video tutorial

In this tutorial, we will see how to replace the rear lights on the Volkswagen ID.4, a very simple and quick operation. First of all, let's make sure that the instrument panel is turned off to operate safely.

Then, we open the trunk and unclip the plastic cover located at the inner edge of the light in question. Next, we unscrew the two bolts that have just been freed using a Torx wrench, grasp the light, and separate it from the body.

At this point, all that remains is to disconnect the power connector, connect the replacement part, and reassemble everything by following the reverse procedure.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) All the fuses of the Volkswagen ID.4 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will…
Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) Each of the fuse boxes of the Volkswagen ID.4 contains the fuses that regulate the operation of the devices on the car: in this type of vehicle it wi…
How to adjust and change the ambient lights of the Volkswagen ID 4.
How to adjust and change the ambient lights of the Volkswagen ID 4.
Volkswagen Id 4 (2020-2026 / MK 1) Below we will see the instructions that will allow us to make all the various adjustments to the ambient lights of the Volkswagen ID 4. First of all,…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos